pasted wallpaper quickly and easily. any particular pattern they have (Sawdust, you know, scattered randomly), so the land can not adjust. Sticker, paint and remove wallpaper 1. Apply the adhesive (After applying glue to the wallpaper you need to wait 10 minutes 'overexposed' canvas can be melted so that the glue is simply nothing) 2. Impose leaf wallpaper 3.
Presses the roller 4. Cut the edge with a spatula and a knife 5. Subsequent sheets are pasted back to back 6. Places with a sharp knife cut the overlay 7. Apply the paint paint roller 8. Remove wallpaper dry without residue 9. Desktop dual-layer on the relief of most collections is embossed.
First, glue two sheets of paper, then the resulting fabric is rolled between two rollers. At one of the rollers is made a convex drawing, on the other, on the contrary, the figure pressed into the roller. Clearly, when the paper is rolled on the future wallpaper pattern is pressed. If you choose wallpaper for painting then consider some special features. First, the flip side wallpaper paintings are not smooth, and the same relief as the front. Therefore, the wrong side to how to lubricate the glue. Secondly, this type of wallpaper necessarily required rapport – fit the edges. & Nbsp3. Sandwich Wallpaper – rather, it is modification of the bilayer. The third layer is glued to the already held together by two layers, as if he strengthens the stamping. In addition, these wallpapers stick is much easier: the back side, just because of the third layer is smooth. Therefore, the adhesive will be better absorbed. But the wall must be perfectly aligned. So if there's one place had a wall putty, you will have to walk across the surface of the filler. How to smooth wallpaper? In order to avoid air bubbles walk the special wallpaper brush, holding it down on the wall.