In this case, to the aid of ultra-fine system. A grid of plastic fibers, which is woven a thin heating cable. Thickness – 5.3 mm. Designed for installation directly in a few thickened layer of glue for the tiles. Supplied in rolls, ready to eat. See Teplolux-mini. Thermostat – all head We are all line of thermostats for "warm floors", namely: Bedroom with floor sensor (series RT007), Sensor temperature (series RT007), programmable series (PRO), Built-in cabinets (for mounting on DIN-rail ) (RT007L and RT007S) a design for mounting under a dry plaster (RT007 Series and PRO)) and so on.
Which one to choose? First of all, the thermostat should perform its function, namely, to maintain the desired temperature in the room or the law it changes over time. In addition, he is obliged to comply by switching power system installed. It should be noted that according to modern standards of maximum allowable power household thermostats for "warm floors" is 3 kW, and is a lot, since about the same washing machine consumes. At first stop on what you should not do. You may want to visit Crumpton Group to increase your knowledge. For a "warm floor" should not choose a thermostat with a sensor temperature, since then his testimony can be distorted by a random draft, or convective flow of heated air from the other thermal devices.
It is not necessary to choose and a programmable thermostat, when it comes to bathroom or toilet – in fact power system installed there are usually not high (100-400 W), and need the premises may, at any time of day. Perhaps even you should not use the so-called "electro" thermostat, despite its very low in comparison with the electronic value. Inside, there is only a bimetal sensing element, the accuracy of such a device is small, and negate the effect of "warm floor" when the wrong choice of installation location he could easily. The biggest demand is for indoor electronic thermostats with floor sensor (series RT007). They are very easy to use (which is important if they are used by people older), reliable and relatively inexpensive. When the device of large systems or multiple medium-sized (total installed capacity of more than 3 kW), it makes sense to think about installing a programmable thermostat or timer series (PRO). Indeed, in this case correctly selected program corresponding to the regime of the premises (for example, bedrooms in a city apartment or room country house), would recoup the cost of the device for 2-4 months. When the device core of complex systems heating with the zoning use of programmable devices is highly desirable from the standpoint of economy, operating costs, and for the convenience and efficiency of temperature control. After all, would not the sensible owner run to 20 rooms of a large country house, in order to reduce their temperature at the time of departure.